<p id="rnzrp"></p>

    <address id="rnzrp"></address>
        <address id="rnzrp"></address>
          <address id="rnzrp"></address>

            <form id="rnzrp"></form>

            <address id="rnzrp"><form id="rnzrp"><listing id="rnzrp"></listing></form></address>

             

            產品中心

            多功能工具機

            0.00
            0.00
            產品型號:
            產品編號:
              




            主要規格和技術參數 

            AT520
            AT750
            床身上最大回轉直徑
            300mm
            300mm
            兩頂尖距離
            500mm
            750mm
            主軸通孔直徑
            26mm
            26mm
            主軸轉速
            160-1600r/min
            160-1600r/min
            主軸錐度
            NO.4
            NO.4
            刀架最大移動行程
            80mm
            80mm
            工作臺最大橫向行程
            200mm
            200mm
            公制螺紋
            0.5-3mm
            0.5-3mm
            英制螺紋
            11-40 1/n""
            11-40 1/n""
            尾座錐度
            NO.3
            NO.3
            尾座套筒行程
            50mm
            50mm
            電機功率
            0.55kw
            0.55kw
            最大鉆削范圍
            20mm
            20mm
            最大盤銑范圍


            最大立銑范圍


            主軸轉速
            315-2000r/min
            315-2000r/min
            主軸錐度
            NO.3
            NO.3
            主軸行程
            80mm
            80mm
            主軸端面至工作臺距離
            240-320mm
            240-320mm
            工作臺尺寸
            425*150
            425*150
            鉆銑頭垂直回轉
            360
            360
            電機功率
            0.37kw
            0.37kw
            凈重
            230kg
            270kg
            外形尺寸
            1100*550*740
            1350*550*740
            Features 

            ◆ Compact, versatile combination machine. 
            ◆ Adjustable height drill/mill head increases capacity. 
            ◆ Large MT4 spindle bore. 
            ◆ Fine feed handle and clutch for precision milling. 
            ◆ Headstock provides two step of feeds. 
            ◆ Spindle is supported by high precision bearing. 
            ◆ Headstock is constantly oiled during operation. 
            ◆ T-slot cross slide. 
            ◆ Adjustable gibs for the slideway. 
            ◆ Power longitudinal & cross feed. 
            ◆ Gearbox gets left and right hand threads to cut. 
            ◆ High precision chuck. 
            ◆A combination switch 
            ◆ Tailstock may be offset for turning taper. 


            Threading Dial & Half Nut 
            It can be realized power feed on longitudinal or crosswise. 
            cut and chase threads like a master machinist. you can cut right-and left-hand threads in metric and inch. 


            Bi-directional power-feed 
            No stop to realized the functions of positive and negative on the lathe. leadscrew & crossfeed screw on both lathe and mill-yield finish of highest quality work 


            Two separate motors 
            This machine is multi-purpose machine tool of bench type, it is mainly used to lathe, drill and mill. which controlled by two motor. 


            Quick Changeover 
            Bigger mill clearance allows room for both lathe and mill setups without removing the lathe chuck.

            產品詳情:
            中国老太婆牲交真人视频_苍井空波多野结衣免费看_中文字幕av_欧美日韩一级黄色视频口