<p id="rnzrp"></p>

    <address id="rnzrp"></address>
        <address id="rnzrp"></address>
          <address id="rnzrp"></address>

            <form id="rnzrp"></form>

            <address id="rnzrp"><form id="rnzrp"><listing id="rnzrp"></listing></form></address>

             

            產品中心

            多功能工具機

            0.00
            0.00
            產品型號:
            產品編號:
              


            主要規格和技術參數 
            車削
            AT320
            機身上最大工件回轉直徑
            320mm
            最大工件長度
            750mm
            刀架上最大回轉直徑
            200mm
            主軸通孔直徑 
            38mm
            主軸孔莫氏錐度
            NO.5
            刀架最大橫向行程
            150mm
            小刀架最大縱向行程 
            100mm
            加工公制螺紋種數
            21
            加工公制螺紋螺距 
            0.45-6mm
            加工英制螺紋種數
            28
            加工英制螺紋螺距
            5-48 1/n"
            主軸每轉刀架的縱向進給量
            0.01-1.5/r
            主軸每轉刀架的橫向進給量
            0.025-0.34/r
            尾架套筒的最大移動量
            80mm
            尾架內孔莫氏錐度
            NO.3
            主軸轉速級數
            12
            主軸轉速范圍
            60-1600r/min
            電機
            1.1kw

            鉆銑削
            AT320
            最大鉆孔直徑
            16mm
            鉆銑頭箱繞立柱回轉角度
            360
            主軸轉速級數
            4
            主軸轉速范圍
            260-2620r/min
            主軸孔莫氏錐度
            No.3 or R8
            電機
            0.37kw


            其他
            凈重 
            400kg
            外形尺寸
            1540*625*1750

            Features 

            ◆ Compact,versatile combination machine. 
            ◆ Adjustable height drill/mill head increases capacity. 
            ◆ Large MT5 spindle bore. 
            ◆ Large distance between center on longitudinal. 
            ◆ Fine feed handle and clutch for precision milling. 
            ◆ Headstock provides two step of feeds. 
            ◆ Spindle is supported by high precision bearing. 
            ◆ Headstock is constantly oiled during operation. 
            ◆ T-slot cross slide. 
            ◆ Adjustable gibs for the slideway. 
            ◆ Power longitudinal & cross feed. 
            ◆ Gearbox gets left and right hand threads to cut. 
            ◆ High precision chuck. 
            ◆ Equipped with emergency stop button. 
            ◆ A reversion switch is included for added versatility. 
            ◆ Tailstock may be offset for turning taper. 
            ◆ with the added control rod, it is easier to handle. 


            Gear drive power for lathe 
            It has 12-garde spindle gearshift for cutting, large spindle holes and large chuck 


            Threading Dial & Half Nut 
            It can be realized power feed on longitudinal or crosswise. 
            cut and chase threads like a master machinist. you can cut right and left-hand threads in metric and inch. with the added control rod, it is easier to handle. 


            Bi-directional power-feed 
            No stop to realized the functions of positive and negative on the lathe. leadscrew & crossfeed screw on both lathe and mill-yield finishes,highest quality work. 


            Gear drive power for mill & drill-It has 4 gearshift for drilling and milling. the drilling and milling head can work with angle changed  ? 


            Induction hardened, precision ground V-way bed 


            Quick Changeover & Two separate motors 
            Bigger mill clearance allows room for both lathe and mill setups without removing the lathe chuck. this machine is multi-purpose machine tool of bench type, it 
            is mainly used to lathe,drill and mill. which controlled by two motor 


            STANDARD ACCESSORIES 
            1. 3-jaw chuck 
            2. dead center 
            3. allen wrench 
            4. double open end wrench 
            5. chuck wrench 
            6. change gear 
            7. drill chuck 
            8. machine base 


            SPECIAL ACCESSORIES 
            1. turning tool set 
            2. steady rest 
            3. follow rest 
            4. machine vice 
            5. face mill cutter 
            6. face plate 
            7. back plate(φ160/φ200) 
            8. four-jaw chuck(φ160/φ200) 
            9. step block 
            10. rolling center

            產品詳情:
            中国老太婆牲交真人视频_苍井空波多野结衣免费看_中文字幕av_欧美日韩一级黄色视频口